LOW TEMPERATURE BATH CIRCULATOR
This type of cooling circulator is mostly used for replacing tapwater used for cooling purposes in laboratory equipment or processes. The bath contence is 9 litres
The used cooling system is ozone friendly, so it doesn't contain any CFK/HCFK gas With the compressor running continuously, the fluid temperature is regulated through an electronic controlled heater.
The TLC10b offers following working range:
-45 to +20�C / -49 .. 68�F
The setpoint can be set in steps of 0,1�. The overall system accuracy is better than �0,1�K. Standard available in �C, on request in �F.
A pressure pump provides circulation in the bath or via an external circuit. The pressure of the pump is 300 mBar at 7,5 ltrs per minute.
The bath conforms CE regulation. It is further equiped with a mechanical adjustable and resettable safety thermostat.
Range -45�C..20�C (-49�F..68�F)
Reading Standard �C, �F on request
Used materials inside bath Stainless Steel 304, PTFE
Setting � [�K] 0,1
Stability* � [�K] Better than 0,1
Heating [W] 1500
Bath volume [L] 9
Pump pressure [mm H2O] 300
Pump cap. L/min 7,5
Compressor Hp 1/3
[W] @10�C : 680
[W] @0�C : 560
[W] @-10�C : 480
[W] @-20�C : 380
[W] @-30�C : 265
[W] @-40�C : 170
Opening [mm] 100*150
Depht [mm] 200 x Length [mm] 260 x Width [mm] 550
Hight [mm] 770 x Weight [Kg] 61,5 x Power [W] 2420
All models conform CE regulation
Low temperature 3.5 L bath/circulator
Low temperature 11 L bath/circulator
Low temperature 5.5L bath/circulator
Low temperature 5L bath/circulator
Low temperature 10L bath/circulator