LOW TEMPERATURE BATH CIRCULATOR
This type of cooling circulator is mostly used for replacing tapwater used for cooling purposes in laboratory equipment or processes. The bath contence is 3.5 litres.
The used cooling system is ozone friendly, so it doesn't contain any CFK/HCFK gas.
With the compressor running continuously, the fluid temperature is regulated through a electronic controlled heater.
The working temperature range is :
-20 to +100°C / -4..212°F
The setpoint can be set in steps of 0,1°. The overall system accuracy is ±0,1°K
Standard available in °C, on request in °F.
A pressure pump provides circulation in the bath or via an external circuit. The pressure of the pump is 300 mBar at 7,5 ltrs per minute.
The bath conforms CE regulation. It is further equiped with a mechanical adjustable and resettable safety thermostat.
Range -20°C..100°C (-4°F..212°F)
Reading Standard °C, °F on request
Used materials inside bath Stainless Steel 304, PTFE
Setting ± [°K] 0,1
Stability* ± [°K] Better than 0,1
Heating [W] 780
Bath volume [L] 3,5
Pump pressure [mm H2O] 300
Pump cap. L/min 7,5
Compressor Hp 1/6
Heat removal [W] @20°C : 260
[W] @0°C : 130
[W] @-10°C : 65
Opening [mm] 130*32
Depht [mm] 217
Length [mm] 260
Width [mm] 360 x Hight [mm] 600 x Weight [Kg] 35
Power [W] 1750
CE All models conform CE regulation